Changeur de jeu Noyau en mousse de polyuréthane Flyweight Front-End Construction Ferrule de visée blanche mince 2.5mm Tiger ® Sniper Tip Maintien de la finition de l’arbre Cuetec Cynergy. Ne jamais utiliser de poudre pour bébé, de craie pour les mains, de poudre de talc ou d’autres traitements de l’arbre sur un arbre en composite de fibre de carbone Cuetec Cynergy. Pour nettoyer la surface de votre arbre en composite de carbone Cuetec Cynergy, vous n’aurez besoin que de quelques matériaux ; de l’alcool isopropylique (75 % ou plus) et deux (2) serviettes en tissu doux propres et sans débris. Étape 1.Enlever la poussière et les débris en essuyant l’arbre avec un chiffon doux et propre. Étape 2. Appliquer une quantité raisonnable d’alcool isopropylique (75 % ou plus) sur une serviette en tissu doux et propre. Ensuite, passez la serviette de haut en bas sur la longueur de l’arbre, tout en faisant tourner votre main autour de sa circonférence. Il est possible que des saletés soient visibles sur la serviette, ce qui est tout à fait normal. Continuez à travailler l’arbre avec le même mouvement jusqu’à ce que toutes les zones aient été soigneusement essuyées, puis laissez la surface sécher quelques instants. Changer l’embout de votre shaft Cuetec Cynergy. * Utilisez toujours un forgeron de queue reconnu et éprouvé. Ne laissez jamais un fabricant de baguettes poncer ou modifier la finition de la flèche lors de l’installation d’un nouvel embout. Remplacement de la virole de votre flèche Cuetec Cynergy. Warpage Abus Diamètre de l’arbre Les diamètres des arbres en composite de carbone Cynergy ne doivent jamais être modifiés.
Les tiges en composite de carbone Cynergy 15K de Cuetec ont été créées à l’aide de plusieurs couches de filaments de fibre de carbone unidirectionnels imprégnés de résine de qualité militaire. Le diamètre de chaque filament est de 7 um (0,007 mm), soit environ un douzième d’un cheveu humain. L’orientation de ces filaments de fibre de carbone est cruciale pour obtenir une durabilité, une résistance et des performances maximales. Au cours du processus de durcissement à chaud, chacun de ces filaments orientés de manière spécifique travaille de concert pour garantir l’absence de déplacements nets. Le résultat est un manche parfaitement droit et ultra résistant.
Le centre de chaque manche en composite de carbone Cynergy est son noyau en mousse de polyuréthane à très haute densité. Ce noyau en mousse de polyuréthane, propriété de Cuetec, ajoute de la stabilité à la flèche, permettant une flexion prescrite et créant un son plus semblable à celui du bois lors du contact, avec une sensation et une rétroaction accrues.
Le maintien d’un poids faible est crucial pour une flèche afin de minimiser la déviation de la bille de billard. Moins de poids signifie moins de déviation. Bénéficiant d’une construction en composite de carbone ultra solide, chaque flèche Cynergy 15K est dotée de la construction frontale flyweight de Cuetec. Cette construction permet au poly-mousse Cynergy de s’arrêter cinq pouces en dessous de la pointe, créant une cavité rigide avec moins de masse et donc moins de déviation au contact.
Développé pour offrir au joueur de billard l’expérience de jeu la plus confortable possible, chaque manche en fibre de carbone Cuetec Cynergy 15K est doté du tout nouveau Super Slim Taper. Mesurant 15,5 pouces de longueur à partir de l’embout, chaque manche Cynergy n’a pratiquement pas d’élévation, ce qui permet un coup plus uniforme et plus précis, quelle que soit la longueur du coup du joueur.
La ferrule mesure seulement 0,25 pouces de long, la ferrule de visée blanche mince et légère sur chaque bâton Cynergy aide non seulement au contraste de visée et à la perception de la profondeur, mais elle fournit également une plate-forme plus familière et plus stable pour l’entretien et le remplacement des pointes pendant la durée de vie du bâton.
Sélectionné pour ses attributs de haute performance et de frappe neutre, chaque manche Cynergy est associé à un embout Sniper. Durci naturellement pendant plus d’un an, chaque embout Sniper est méticuleusement affûté, grâce à un processus unique de laminage sous vide qui garantit l’élimination de l’air entre les dix couches de l’embout.
Les arbres en composite de carbone Cuetec Cynergy ne doivent jamais être poncés ou modifiés. L’utilisation d’un abrasif sur la surface de l’arbre endommagera la finition de l’arbre et pourrait affaiblir les filaments de fibre de carbone de l’arbre et décharger des matériaux potentiellement nocifs qui pourraient être dangereux pour votre santé. Tout polissage, ponçage ou traitement de la surface de l’arbre avec des abrasifs ou des produits chimiques de quelque nature que ce soit annulera la garantie de l’arbre.
Les shafts Cynergy en carbone composite de Cuetec sont dotés d’une virole de visée blanche légère. Cette inclusion dans la construction de l’extrémité avant du manche Cynergy permet un remplacement plus facile de l’embout pendant la durée de vie du manche. Lors du remplacement de la pointe, il est important de nettoyer et de refaire la surface de la virole. La hauteur minimale de la virole doit être supérieure à 1 mm pour maintenir la couverture de la garantie de la flèche.
Bien que peu probable, si la virole de l’arbre Cuetec Cynergy doit être remplacée, cela doit être fait par un centre de réparation Cuetec Cynergy agréé. Cela est nécessaire en raison de la nature complexe des agents de liaison utilisés et pour s’assurer qu’aucun dommage n’est causé aux filaments de fibre de carbone de l’arbre.
Les arbres en composite de carbone Cynergy de Cuetec sont assortis d’une garantie à vie limitée contre le gauchissement.
Les arbres Cynergy en carbone composite de Cuetec ne sont pas conçus pour tolérer une pression latérale considérable. Ils ne doivent jamais être fléchis de manière excessive, frappés sur d’autres objets ou traités avec des abrasifs, qu’ils soient solides ou liquides.
Les diamètres des arbres en composite carbone Cynergy de Cuetec ne doivent jamais être modifiés. Tout ponçage, polissage ou traitement abrasif pourrait compromettre les couches ultrafines de filament de fibre de carbone et annulerait immédiatement la garantie de l’arbre Cynergy.
Promo !
Cuetec Radial Joint Cynergy Carbon Shaft
€399.00 €75.98
- En stock. La vente se termine bientôt !
- Les clients sont en train de parcourir.
- De A acheté cet article.
- Les clients ont déjà acheté.
UGS : ND
Catégorie : Cuetec
Étiquettes : Carbone, Cuetec - Cynergy Carbon Fiber Shafts, default_tip_SLCT, wholesale_30_25_20
Conçue et développée avec l’aide de Shane Van Boening, cinq fois champion de l’Omnium des États-Unis, pour une performance de classe mondiale, Cuetec est fière de présenter la toute nouvelle queue de billard Cynergy 15K en composite de carbone. La Cynergy 15K de Cuetec a été créée avec un motif exclusif de fibre de carbone 15K filée, renforcée par un poly-mousse ; la Cynergy 15K utilise un cône droit élargi, une virole de visée blanche excessivement mince et un embout Tiger Sniper de 12,5 mm pour constituer une flèche qui est remplie de fibre de carbone à faible déflexion, avec la sensation et la rétroaction du bois : #800000 ; »>Filaments de fibre de carbone multidirectionnels
SST (Super Slim Taper)
CYNERGY 15K CARBON FIBER SHAFT CARE & ; MAINTENANCE
Soyez le premier à laisser votre avis sur “Cuetec Radial Joint Cynergy Carbon Shaft” Annuler la réponse
Produits similaires
Promo !
Promo !
Promo !
Promo !
Promo !
Promo !
Promo !
Promo !
Avis
Il n’y a pas encore d’avis.